[Tigers] F4B Coil Placement

[Theo Smit]

A 2 1/2 inch 5/16-18 screw would be one of the manifold-to-head mounting screws. If it was direct into the manifold there would be no reason to have more than about one inch of length. 
-Theo

> On Dec 30, 2021, at 8:38 PM, Will Seay via Tigers <tigers at autox.team.net> wrote:
> 
> 
> My apologies.  Just checked the F4B install instructions and it says "Mount coil on manifold as shown with furnished 5/16-18 X 2 1/2" cap screw".  So I guess that somewhere on the manifold there's a 5/16-18 threaded hole.
> 
> Will - 382001570 
> Tigers at embarqmail.com
> 
> 
>> On Thu, Dec 30, 2021 at 2:59 PM jimdamelio via Tigers <tigers at autox.team.net> wrote:
>> Attached is a picture from the original LAT F4B intake kit.  Note the placement of the coil is at an angle.  Did this allow the use of the original bracket and where would it bolt. 
>> 
>> Jim D
>> 
>> 
>> 
>> Sent from my Galaxy
>> 
>> _______________________________________________
>> 
>> tigers at autox.team.net
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
>> 
>> Unsubscribe: http://autox.team.net/mailman/options/tigers/tigers@embarqmail.com
>> 
>> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20211230/0afbb712/attachment-0001.htm>