[Tigers] Reproduction Gas Cap Lid

[jimdamelio]

Thanks to everyone who responded.  I have the old one apart, but need a number 4 bottoming tap and a new cork gasket to install the new cap.Sent from my Galaxy
-------- Original message --------From: Ron Fraser <rfraser at bluefrog.com> Date: 12/18/21  2:05 PM  (GMT-05:00) To: 'jimdamelio' <jimdamelio at verizon.net> Cc: tigers at Autox.Team.Net Subject: RE: [Tigers] Reproduction Gas Cap Lid JimThe quick answer is YES.I do not remember all the details, I did this too long ago.You should contact Tiger Tom or Rick to see if there are instructions. Ron Fraser  From: Tigers <tigers-bounces at autox.team.net> On Behalf Of jimdamelio via TigersSent: Saturday, December 18, 2021 1:24 PMTo: tigers at Autox.Team.NetSubject: [Tigers] Reproduction Gas Cap Lid I purchased a repro gas cap lid from Tiger Tom years ago.  I'm sure it's the same one Rick sells.  I was wondering if there are any instructions on attaching this to the base.  Can you thread the lid bosses to except screws for the center section and spring? Do the pins push out or do they have to be drilled? Don't want to mess this up. Jim D   Sent from my Galaxy 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20211218/50ca3f94/attachment.htm>