[Tigers] Bolt size for heater valve <-> pipe flange?

[D or G at sbc]

 It is 10/32 (10NF) by 5/8" long. On the "donut ring" get the thickest you can find (at least 1/8"), you might also want to put some silicon on it.
David Franchi

    On Saturday, October 10, 2020, 12:16:14 PM PDT, R Flynn via Tigers <tigers at autox.team.net> wrote:  
 
 Does anyone happen to know the bolt size for the 2 bolts that are used between the valve itself and the pipe flange (with the mounting bracket sandwiched in between, photo below)?
The look like maybe 12-24, but I don’t have a tap or die to confirm that ...
It appears as though the leak in mine is caused because the seal between these two has perished, but so has one of the bolts!  Going try replacing it with a small donut ring to see if that cures the issue.
Cheers in advance,
Rick

-- 
rick
B9471206: http://www.tigersunited.com/car_show/flynn_r/default.asp_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/orr4sale@sbcglobal.net


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20201011/d57ca5f9/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0171.jpg
Type: image/jpg
Size: 1718881 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20201011/d57ca5f9/attachment-0001.jpg>