[Tigers] Pivot pins for tension rods on convertible top

[R Flynn]

FWIW, 3/16" E clip does the trick.

On Sat, 21 Nov 2020 at 16:03, Ron Fraser <rfraser at bluefrog.com> wrote:

> Rick
>
>                 Yes, looks like there should be a clip – part # 245
>
>
>
> Ron Fraser
>
>
>
>
>
> *From:* Tigers <tigers-bounces at autox.team.net> *On Behalf Of *R Flynn via
> Tigers
> *Sent:* Saturday, November 21, 2020 1:44 PM
> *To:* <tigers at Autox.Team.Net> <tigers at autox.team.net>
> *Cc:* R Flynn <flynnr2 at gmail.com>
> *Subject:* [Tigers] Pivot pins for tension rods on convertible top
>
>
>
> The chrome pivot pins have a channel near the end, presumably for some
> sort of retaining clip (my car has never had clips there).
>
>
>
> Is that correct?  If so, I am guessing they are some sort of e clip?
>
>
>
> Getting tired of the pins popping out on the rare occasion I actually put
> the top up!
>
>
>
> Cheers in advance,
>
>
>
> --
>
> rick
> B9471206: http://www.tigersunited.com/car_show/flynn_r/default.asp
>


-- 
rick
B9471206: http://www.tigersunited.com/car_show/flynn_r/default.asp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20201122/dade4498/attachment.htm>