[Tigers] inside door parts questions

Ron Fraser rfraser at bluefrog.com
Fri May 29 12:48:24 MDT 2020


The rubber widget is pressed into the handle cavity.

 

9122188                rubber pad          listed for door handle and window regulator

 

I dug one of these pads out of a spare window regulator handle.   The spare door handle I have did not have a rubber pad.

 

Dimensions - .35” x .384”              .293” thick

Material – rubber with some spring force – I’m not the durometer specialist so not sure how to express this property

Part is tampered so the Rootes drawing would be needed to see the exact dimensions.

 

Ron Fraser

 

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Gary
Sent: Thursday, May 28, 2020 12:46 AM
To: Derek Daily <dtdaily at yahoo.com>
Cc: James Armstrong <rollright at aol.com>; Tiger Talk List Tiger <Tigers at autox.team.net>
Subject: Re: [Tigers] inside door parts questions

 

I would assume that pictured little rubber

piece goes inside the handle before you

put it in the post.

You must get the pin centralized in the

handle, then the spring can push the ring

out.  The ring keeps the pin from falling out.

I have used cut off nails when I have lost the

pins.

Gary

Sent from my iPhone





On May 27, 2020, at 9:01 PM, Derek Daily via Tigers <tigers at autox.team.net <mailto:tigers at autox.team.net> > wrote:

Hmmm, i was just going through door reassembly this weekend. Where would the rubber "sleeve" go? In my case, early MKIA ...000428, the handles are snug over the male post. In fact, as one of those original fixing pins has gone missing, i attempted to use plumbing tape over the post prior to replacing the handle pin and the handle could not slide over the thin tape. No way a rubber sleeve would work on this car (unless im misunderstanding Placement location..). 

 

FWIW, i have three donuts per side. Two on door latch post One on window crank. However, I can state no knowledge of original location. 

 

Also: while we on on this Door topic, about the escutcheon with chrome ring and spring to mate from door card to "base" of lever after reattaching... those suck. On most i have the chrome pushed in to eacutcheon far enough to allow the pin to be inserted and no way to pull chrome out once handle is connected. Even if i did, the chrome would never slide back in to allow handle pin removal Ever again. All hardware here including card are original. 

 

Lets see if i can attach...

 

 

<image1.jpeg>

 

 

Derek Daily

dtdaily at yahoo.com <mailto:dtdaily at yahoo.com> 





On May 27, 2020, at 6:09 PM, michael king <michael.s.king at gmail.com <mailto:michael.s.king at gmail.com> > wrote:

Sorry photo didn't attach...the anti rattle rubber.

 

On Thu., 28 May 2020, 11:08 michael king, <michael.s.king at gmail.com <mailto:michael.s.king at gmail.com> > wrote:

Jim..  I havent got access to the manuals in front of me... But.. The doors have the felt spacers on the winder and handle. They also had a rubber spacer sleeve that was used on the handles that goes over the shaft and the handle slips over those so stop them rattling.. Maybe thats what you are looking at?

 

Pic attached

 

 

 

On Thu., 28 May 2020, 08:59 James Armstrong via Tigers, <tigers at autox.team.net <mailto:tigers at autox.team.net> > wrote:

Hello,

 

In putting my door back together, I have a few questions:

1) are there two felt donuts, one on the window winder shaft (shown but not called out in Alpine parts manual) and is there another on the door opener shaft?

 

2) what the heck are part #s YX  Illus. B # s  98 and 98/1 inside of door around the door opening shaft?

Also in the Alpine parts manual Series 3 and up

 

Help please

 

Jim

 

Jim Armstrong

Mk 1A

382002083 





<4aef7790.jpg>

_______________________________________________

tigers at autox.team.net <mailto:tigers at autox.team.net> 

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20200529/91326beb/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: top.jpg
Type: image/jpeg
Size: 79245 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20200529/91326beb/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: side.jpg
Type: image/jpeg
Size: 63549 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20200529/91326beb/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bottom.jpg
Type: image/jpeg
Size: 66491 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20200529/91326beb/attachment-0005.jpg>


More information about the Tigers mailing list