[Tigers] Booster Issue

[Joe Brown]

I just talked to Rick and his solution is an 8" piece of line with two male
fittings (HL8) plus two unions (HL2).  You have to bend the line to make it
work but it will work for me.

Thanks,
Joe Brown

On Wed, Jun 17, 2020 at 5:09 PM Jay Laifman <jay.laifman at gmail.com> wrote:

> Rick sells a piece for bypass.
>
> On Wed, Jun 17, 2020 at 2:25 PM Joe Brown <jbbrown1980 at gmail.com> wrote:
>
>> Hi,
>>
>> I finally finished my Tiger enough to take it for a test drive.  First
>> drive was good, so I went for a longer drive and the brakes locked up.
>> Seems to be a classic issue where the booster sticks.  I can crack open the
>> output line and the pressure releases the brakes.  But they lock up again
>> when I apply the brakes again.
>>
>> So, I am trying to make a line to bypass the booster but I'm having
>> trouble finding the female fittings that will mate up with the lines that
>> go to the booster.  Does anybody know where to get them or what they are
>> called?  The female threaded part appears to be 3/8"-14 and I think the
>> tubing that goes into it  is 3/16" with a bubble flare.  I have plenty of
>> tubing, I just need the fittings.
>>
>> Thanks,
>> Joe Brown
>> _______________________________________________
>>
>> tigers at autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers
>> http://autox.team.net/archive
>>
>> Unsubscribe:
>> http://autox.team.net/mailman/options/tigers/jay.laifman@gmail.com
>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20200617/0effcace/attachment.htm>