[Tigers] Refinishing f4b Manifold
michael king
michael.s.king at gmail.com
Thu Feb 8 19:19:51 MST 2018
Jim,
I would suggest the aluminium finish. The F4b would have been installed as
a natural casting, so a lightish grey.
In theory you should just hyrdoblast it and install, but it will darken
over time with heat and dirt.
On 9 February 2018 at 02:52, James Lindner via Tigers <tigers at autox.team.net
> wrote:
> Hi All
>
> I am planning to refinish the f4b manifold on my MkI. I am thinking of
> using Por 15 high temp manifold paint.
>
> My question for the List is which shade is correct for an f4b...the
> factory gray or the aluminum. See the link below...it has an image of the
> different shades available. FYI...other than a few LAT options I have a
> very stock (restored) car and I want it to be as close to original looking
> as possible.
>
> https://www.por15.com/HIGH-TEMP_p_104.html
>
> Thanks
>
> Jim
>
> Shared via the Google app
> <https://itunes.apple.com/app/google/id284815942>
>
>
> Sent from my iPad
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/michael.s.king@
> gmail.com
>
>
>
>
--
Regards
Michael King
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180209/596cd13b/attachment.html>
More information about the Tigers
mailing list