[Tigers] Parts Request

[Gary Winblad]

Mine is on my car so I can't look for numbers, but that looks identical, 
except for the powder coat job..
Gary


On 8/10/2018 2:58 PM, Allan Ballard via Tigers wrote:
>
> Ron,
>
> Here's a temp-sender housing I've had for long enough to forget where 
> it came from. I thought it
>
> was "factory issue" but the numbers don't match so I guess it isn't. 
> It is stamped: 198006 v12 and
>
> appears to be cast. If I am measuring correctly with a balky tape 
> measure the ports are 5/8, 3/4 and 1/4.
>
> I use an F4b intake with a different setup so I don't have a way to 
> see "if it fits" but it appears to be close.
>
> If it does fit and can be identified, then maybe it could be used on a 
> Tiger.
>
>
>
> On 8/10/18 10:29 AM, Will Seay via Tigers wrote:
>> Randall,
>>
>> You may be able to find the copper 'T' fitting at a plumbing supply 
>> place.  The temp-sender housing is unique to the Tiger and will be 
>> hard to find.
>>
>> Good luck
>>
>> -- 
>> Will - 382001570
>> Tigers at embarqmail.com <mailto:Tigers at embarqmail.com>
>>
>>
>> On Thu, Aug 9, 2018 at 8:40 PM, Ron Fraser via Tigers 
>> <tigers at autox.team.net <mailto:tigers at autox.team.net>> wrote:
>>
>>     Randall
>>
>>     Rear fitting as shown = 1224827                 “T” fitting
>>
>>     Front fitting as shown = 1222826                Housing
>>     Temperature transmitter – this is a cast part for the temp sender
>>
>>     These are for the Mk I & Mk IA parts
>>
>>     Mk II has 2 – 1224827      T fitting
>>
>>     1224827                T fitting is brass or copper I don’t know
>>     for sure – this part could be made – 2, 5/8” hose ports and 1, ½”
>>     hose port
>>
>>     I don’t think anyone is remaking this part but you never know;
>>     maybe someone is making them.
>>
>>     Ron Fraser
>>
>>     *From:* Tigers <tigers-bounces at autox.team.net
>>     <mailto:tigers-bounces at autox.team.net>> *On Behalf Of *Randall
>>     Antosiak via Tigers
>>     *Sent:* Thursday, August 09, 2018 3:27 PM
>>     *To:* Tiger List <tigers at autox.team.net
>>     <mailto:tigers at autox.team.net>>
>>     *Subject:* [Tigers] Parts Request
>>
>>     I'm attempting to restore my Tiger's engine compartment, and I'm
>>     missing the original T fittings which are part of the heater hose
>>     assembly.   Just in case someone has these parts sitting on the
>>     shelf and doesn't plan to use them in the future.
>>
>>     Thanks, Randall
>>
>>     Inline image
>>
>>
>>     _______________________________________________
>>
>>     tigers at autox.team.net <mailto:tigers at autox.team.net>
>>
>>     Donate: http://www.team.net/donate.html
>>     <http://www.team.net/donate.html>
>>     Archive: http://www.team.net/pipermail/tigers
>>     <http://www.team.net/pipermail/tigers>
>>
>>     Unsubscribe:
>>     http://autox.team.net/mailman/options/tigers/tigers@embarqmail.com
>>     <http://autox.team.net/mailman/options/tigers/tigers@embarqmail.com>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> tigers at autox.team.net
>>
>> Donate:http://www.team.net/donate.html
>> Archive:http://www.team.net/pipermail/tigers
>>
>> Unsubscribe:http://autox.team.net/mailman/options/tigers/aballard@ix.netcom.com
>>
>>
>
>
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
>
> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
>
>