[Tigers] Parts Request

[Allan Ballard]

Ron,

Here's a temp-sender housing I've had for long enough to forget where it 
came from. I thought it

was "factory issue" but the numbers don't match so I guess it isn't. It 
is stamped: 198006 v12 and

appears to be cast. If I am measuring correctly with a balky tape 
measure the ports are 5/8, 3/4 and 1/4.

I use an F4b intake with a different setup so I don't have a way to see 
"if it fits" but it appears to be close.

If it does fit and can be identified, then maybe it could be used on a 
Tiger.



On 8/10/18 10:29 AM, Will Seay via Tigers wrote:
> Randall,
>
> You may be able to find the copper 'T' fitting at a plumbing supply 
> place.  The temp-sender housing is unique to the Tiger and will be 
> hard to find.
>
> Good luck
>
> -- 
> Will - 382001570
> Tigers at embarqmail.com <mailto:Tigers at embarqmail.com>
>
>
> On Thu, Aug 9, 2018 at 8:40 PM, Ron Fraser via Tigers 
> <tigers at autox.team.net <mailto:tigers at autox.team.net>> wrote:
>
>     Randall
>
>     Rear fitting as shown = 1224827                 “T” fitting
>
>     Front fitting as shown = 1222826                Housing
>     Temperature transmitter – this is a cast part for the temp sender
>
>     These are for the Mk I & Mk IA parts
>
>     Mk II has 2 – 1224827      T fitting
>
>     1224827                T fitting is brass or copper I don’t know
>     for sure – this part could be made – 2, 5/8” hose ports and 1, ½”
>     hose port
>
>     I don’t think anyone is remaking this part but you never know;
>     maybe someone is making them.
>
>     Ron Fraser
>
>     *From:* Tigers <tigers-bounces at autox.team.net
>     <mailto:tigers-bounces at autox.team.net>> *On Behalf Of *Randall
>     Antosiak via Tigers
>     *Sent:* Thursday, August 09, 2018 3:27 PM
>     *To:* Tiger List <tigers at autox.team.net
>     <mailto:tigers at autox.team.net>>
>     *Subject:* [Tigers] Parts Request
>
>     I'm attempting to restore my Tiger's engine compartment, and I'm
>     missing the original T fittings which are part of the heater hose
>     assembly.   Just in case someone has these parts sitting on the
>     shelf and doesn't plan to use them in the future.
>
>     Thanks, Randall
>
>     Inline image
>
>
>     _______________________________________________
>
>     tigers at autox.team.net <mailto:tigers at autox.team.net>
>
>     Donate: http://www.team.net/donate.html
>     <http://www.team.net/donate.html>
>     Archive: http://www.team.net/pipermail/tigers
>     <http://www.team.net/pipermail/tigers>
>
>     Unsubscribe:
>     http://autox.team.net/mailman/options/tigers/tigers@embarqmail.com
>     <http://autox.team.net/mailman/options/tigers/tigers@embarqmail.com>
>
>
>
>
>
>
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
>
> Unsubscribe: http://autox.team.net/mailman/options/tigers/aballard@ix.netcom.com
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180810/1243bdf0/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 221396 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20180810/1243bdf0/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: tiger tee.jpeg
Type: image/jpeg
Size: 1657706 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20180810/1243bdf0/attachment-0001.jpeg>