[Tigers] Clutch Hydraulics
Richard Bruner
gammaman at mokancomm.net
Thu Aug 9 15:33:08 MDT 2018
After a trip to the eye doctor this morning for a corneal abrasion due to
rust somehow falling around my safety glasses and into my eye yesterday
while I was under the car, I tried a different master cylinder this
afternoon and everything is now functioning properly. Thanks once
again to everyone for their help!
On Wed, August 8, 2018 2:37 pm, Richard Bruner via Tigers wrote:
>
>
> I bench bled the master cylinder before installing. I had a
helper
> press the pedal while I opened and closed the bleeder. Air
came
> through the clear tubing I used before fluid with no
air/bubbles. I
> ran another 1/2 bottle of fluid through it after that just to be
> sure. The pedal goes to the floor with no resistance. I
have
> not tried pulling the slave piston in/out.
>
>
>
>
>
> On Wed, August 8, 2018 2:27 pm, Stu wrote:
>
>> How did you bleed it, by pumping the master or by vacuum or
air
> pressure?
>
>> If by pumping the master, then it can apply at least some
pressure to
> the
>
>> system. Does the pedal go to the floor or not go down at all?
Can
> you
>
>> manually pull the slave piston in and out?
>
>>
>
>> The system is pretty simple, so troubleshooting should be
easy.
>
>>
>
>> Stu
>
>>
>
>> On Wed, Aug 8, 2018 at 1:37 PM, Richard Bruner via Tigers <
>
>> tigers at autox.team.net> wrote:
>
>>
>
>>> The clutch on my 1966 would work for awhile after bleeding
it,
> but not
>
>>> for
>
>>> very long, so today I replaced the clutch master cylinder
> (found
>
>>> evidence
>
>>> of leakage when removing the old one), slave cylinder and
hard
> line, and
>
>>> bled the air out of the system. I am still not getting any
> movement of
>
>>> the
>
>>> clutch slave push rod. Any suggestions? The master cylinder
and
> slave
>
>>> came from Victoria British, if that makes any difference.
>
>>>
>
>>> Richard
>
>>> _______________________________________________
>
>>>
>
>>> tigers at autox.team.net
>
>>>
>
>>> Donate: http://www.team.net/donate.html
>
>>> Archive: http://www.team.net/pipermail/tigers
>
>>>
>
>>> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/sabre2tgr@
>
>>> gmail.com
>
>>>
>
>>>
>
>>>
>
>>>
>
>>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
>
> Unsubscribe:
>
http://autox.team.net/mailman/options/tigers/gammaman@mokancomm.net
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180809/29d7376c/attachment.html>
More information about the Tigers
mailing list