[Tigers] Caliper bolts to stainless Grade 8

Bernard McNulty bamcnulty at optonline.net
Tue Apr 3 06:17:39 MDT 2018


Should have been more specific: try Fastenall as a source; there also 
used to be another outfit called All Stainless that I used to buy from 
years ago -- good quality and carried MIL-SPEC hardware.

Good luck.

Tony M.




On 4/2/2018 9:19 PM, Larry Mayfield wrote:
>
> Another source that should not be overlooked is ARP fasteners.  I 
> suspect that they have something that will work well.  Google them up 
> and send then a question and maybe you will have the best there is in 
> short order!
>
> mayf
>
> *From:* Tigers [mailto:tigers-bounces at autox.team.net] *On Behalf Of 
> *Bernard McNulty via Tigers
> *Sent:* Monday, April 2, 2018 5:31 PM
> *To:* Smit, Theo <Theo.Smit at garmin.com>
> *Cc:* James Armstrong <rollright at aol.com>; tigers at autox.team.net
> *Subject:* Re: [Tigers] Caliper bolts to stainless Grade 8
>
> Search suppliers of MIL-SPEC stainless hardware that you need and only 
> purchase to that standard. Never buy Chinese!!!
>
> Tony M.
>
> Sent from my iPhone
>
>
> On Apr 2, 2018, at 7:18 PM, Smit, Theo via Tigers 
> <tigers at autox.team.net <mailto:tigers at autox.team.net>> wrote:
>
>     Common stainless bolts are approximately equivalent to cheese.
>     Maybe try these guys?
>     http://lightningboltandsupply.com/stainless-steel.html
>
>     What I would do is to use quality regular grade 8 fasteners, and
>     find a high temperature clearcoat or silver for the whole assembly.
>
>     Cheers,
>
>     Theo
>
>     *From: *Tigers <tigers-bounces at autox.team.net
>     <mailto:tigers-bounces at autox.team.net>> on behalf of Tigers List
>     <tigers at autox.team.net <mailto:tigers at autox.team.net>>
>     *Reply-To: *James Armstrong <rollright at aol.com
>     <mailto:rollright at aol.com>>
>     *Date: *Monday, April 2, 2018 at 4:15 PM
>     *To: *Tigers List <tigers at autox.team.net
>     <mailto:tigers at autox.team.net>>
>     *Subject: *[Tigers] Caliper bolts to stainless Grade 8
>
>     Hello there,
>
>     Anybody know of a good source of replacement bolts made of grade 8
>     stainless
>
>     that will hold the two halves of a rebuilt brake caliper together?
>
>     Trying to eliminate any rust.
>
>     Jim Armstrong
>
>     Mk 1A
>
>     382002083 LRXFE
>
>     Code 86
>
>     TAC #....
>
>     ------------------------------------------------------------------------
>
>
>     CONFIDENTIALITY NOTICE: This email and any attachments are for the
>     sole use of the intended recipient(s) and contain information that
>     may be Garmin confidential and/or Garmin legally privileged. If
>     you have received this email in error, please notify the sender by
>     reply email and delete the message. Any disclosure, copying,
>     distribution or use of this communication (including attachments)
>     by someone other than the intended recipient is prohibited. Thank you.
>
>     _______________________________________________
>
>     tigers at autox.team.net <mailto:tigers at autox.team.net>
>
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/archive
>     Forums: http://www.team.net/forums
>     Unsubscribe:
>     http://autox.team.net/mailman/options/tigers/bamcnulty@optonline.net
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180403/5df70ed1/attachment-0001.html>


More information about the Tigers mailing list