[Tigers] Alternator Conversion

[Gary Winblad]

I just went to Summit Racing, they have just what you want, and in 
chrome no less.
I hung it with a CAT club bracket, rough copy of the MK2 bracket in 
aluminum.
I ran the one wire to the battery terminal on the solenoid.  The largest 
gauge wire
at the auto parts store is really not large enough for 70amps, so I 
doubled up two
strands.  I also put a 70amp fuse in line but that broke..need to fix 
that...
Don't know why you want a dummy VR?   Just remove it.  I forget what I 
did with
the wires.. I'll look when I have a chance..
Gary

On 9/13/2017 2:02 PM, Joel Martin via Tigers wrote:
> Hello All
>
> After 2 voltage regulators (VR) and 1 rebuild on the generator, I am 
> throwing in the generator towel.  I have read Ron Fraser 2003 article 
> on doing the conversion with a 1965 style ford alternator.
>
> I would like to go with about a 70 min amp one wire AC Delco and 
> making the VR just a dummy.  Can someone recommend the AC Delco 
> alternator part number that would have the built in regulator?  I 
> release a new bracket will need to be made.
>
> I would also like to buy or trade for a radiator overflow tank with 
> brackets.  I also need the fan shroud if anyone has one to complete 
> the engine compartment.
>
> Thanks in advance
>
> Joel Martin
>
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
>
>