[Tigers] Camshaft selection with 331 cu in stroker

Roger Nyberg nyberg.roger at yahoo.com
Mon Nov 20 16:31:07 MST 2017


I'm also doing a 331 stroker motor, Scat crank and rods, and Wisco pistons. I have Promaxx heads with springs for a flat tappet cam, Edelbrock Performer Plus, 224int / 230exh @.050 essentially same numbers as a B303, 5.0 hipo cam but less lift for flat tappet cam. Quite manageable street cam. Flat torque curve to 5500 rpm.
  I use Shell Rotatella 30w oil which has the additives taken out of catalytic converter engine oil.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20171120/68da5cb1/attachment.html>


More information about the Tigers mailing list