[Tigers] Thermostat Housing

michael king michael.s.king at gmail.com
Mon Apr 3 18:07:45 MDT 2017


The early ones dont have the thermostat sensor allowance on the top of the
casting. They lokk cleaner as a part and better to put the hose on. The
repro cast ones normally have the thermostat allowance.. The chrome and
billet aftermarket ones generally don't but while they physically apoear
the same they're not aa thick on the mounting flange generally and the
finish while nice is  not factory. Thye often have a rubber o ring seal and
generally you should plane  the mounting surface as they often have a poor
seal.

Hth

On 4 Apr. 2017 03:00, "Jay Laifman via Tigers" <tigers at autox.team.net>
wrote:

> Is there anything special about the Tiger thermostat housing?  Mine seems
> to have developed a hole through the metal right on top - spraying all over
> the place.  And yes, it appear to be coming straight out of the metal, not
> the hose.
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/michael.s.king@
> gmail.com
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20170404/ccc57e58/attachment.html>


More information about the Tigers mailing list