[Tigers] FE and Frame Update
daniel doornbos
dan_doornbos at hotmail.com
Fri Sep 2 21:43:59 MDT 2016
All I took a min tonight. Sure enough it was called correctly the cross member is bent/compressed at the frame mounting point on the drivers side.
I measured the cross member to frame bolt holes of the frame, stock cross member and the Mike H cross member. All three have the same dimension (taken with a tape measure so might be 1/8-1/4 off with centers). Front and rear across were 22 1/2 and 24.
Here's a link to a few more photos
https://goo.gl/photos/kSup3JxRnhgktNX78
thanks
dan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20160903/d15fc91f/attachment.html>
More information about the Tigers
mailing list