[Tigers] Front Suspension

[CoolVT at aol.com]

That was going to be my question.....when everything was rebuilt was the  
final tightening done on all parts once weight was on the wheels?   
 
 
In a message dated 1/17/2016 5:59:09 P.M. Eastern Standard Time,  
tigers at autox.team.net writes:

 
Since it has been so quiet, I thought  I would throw one out.  My front 
suspension is sooo stiff and the height  is 2-3 inches in my mind higher than 
it should be.  Rebuilt suspension,  welded up per CAT instructions, stock 
springs, Koni shocks - old and all new  rubber etc.


The front has no bounce at all.  First idea is to loosen upper and lower 
control arm bolts, drive just a  bit and then re-tighten.  Can you put the 
front anti sway bar on upside  down - not sure is could be a problem or not.  
Bushing grease on all new  rubber?


Thoughts\ideas would be  appreciated.


Joel Martin,  MK1A



_______________________________________________

tigers at autox.team.net

Donate:  http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe:  http://autox.team.net/mailman/options/tigers/coolvt@aol.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20160117/0e4bd7eb/attachment.html>