[Tigers] Front Suspension

[Joel Martin]

Since it has been so quiet, I thought I would throw one out.  My front suspension is sooo stiff and the height is 2-3 inches in my mind higher than it should be.  Rebuilt suspension, welded up per CAT instructions, stock springs, Koni shocks - old and all new rubber etc.
The front has no bounce at all.  First idea is to loosen upper and lower control arm bolts, drive just a bit and then re-tighten.  Can you put the front anti sway bar on upside down - not sure is could be a problem or not.  Bushing grease on all new rubber?
Thoughts\ideas would be appreciated.
Joel Martin, MK1A
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20160117/1185155e/attachment.html>