[Tigers] Wooden Dash Grab Handle Retrofit
Joe Brown
jbbrown1980 at gmail.com
Wed Apr 22 15:13:23 MDT 2015
For you concours types I believe the original tacks are red;)
Joe Brown
On Apr 22, 2015 4:04 PM, "Derek Daily via Tigers" <tigers at autox.team.net>
wrote:
> Hi Gents,
> For reference, what I did...
> 1) Removed original covering and tacks.
> (NOT easy. Small clipper pliers to lift tack edges, followed by bent
> nose.)
> 2) Purchased similar walnut material to grab from OSH (~$6.00)
> 3) Removed wood from NEW dash grab handle to match the rounded shape of
> original dash via sanding. (YMMV: in my case, the Prestige shape was too
> square)
> 4) Cut and Shaped new wood piece to match original.
> (Removing the original piece was requiring more torque than I felt
> comfortable with)
> 5) Stained new wood piece to match original. ("DD, who's going to see
> this?" I will know...)
> 6) Weldwood contact cemented wood to dash.
> 7) Sanded to smooth transition.
> 8) Contact cement of vinyl covering to entire assembly.
> 9) Tap holes for tacks, with light hammer on awl.
> 10) Insert tacks
> 11) Beer.
>
>
> DD (CA)
> Derek Daily
> dtdaily at yahoo.com
>
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20150422/5fce64e9/attachment.html>
More information about the Tigers
mailing list