[Tigers] Fuel Line
David H. Hall
dhhall at bellsouth.net
Sat Feb 22 10:59:38 MST 2014
An excellent source of fittings, including some of the BSPP ones needed for
the stock fuel pump, is Hose and Fittings, hoseandfittings.com. Helpful
website, and on the phone, and the prices are more than fair. David
________________________________
From: Paul Memont <prmnes at verizon.net>
To:
tigers at autox.team.net
Sent: Monday, February 17, 2014 1:23 PM
Subject: Re:
[Tigers] Fuel Line
I gave up my Tiger a few years back but still drive my
Land Rover a lot!
I started using Soltron fuel additive in my V8 Holly 4
barrel carburetor
equiped Land Rover. My millage went from just over 10-11
mpg to 13 on a
long trip. It is advertised as canceling the effects of the
10% ethanol
in gas. It's used a lot in marine engines. I use 1 ml per
gallon.
No I don't have stock in the co!
Paul
On 2/16/14, 8:36 PM,
csx2282 wrote:
> I 100% agree. Ethanol destroys rubber. I can personally
attest to
> this. I had standard Earls stainless braided rubber fuel lines
and
> they disintegrated after about 4 years. Braided stainless Teflon AN is
> the way to go, IMO. Even if ethanol isn't in the fuel in your area,
> you
never know where you may be driving some time in the future.
>
--------------------------------------
>
> Date: Sun, 16 Feb 2014 12:56:36
-0800
> From: "Bob Hokanson" <tgrrr at frontier.com>
>
> Compromise:
>
> AN
fittings with braided stainless PTFE lined hose .
>
_______________________________________________
>
> tigers at autox.team.net
>
>
Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
>
http://autox.team.net/mailman/options/tigers/prmnes@verizon.net
_______________________________________________
tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/dhhall@bellsouth.net
More information about the Tigers
mailing list