[Tigers] FYI

[Tom Hall]

On 2/2/2014 9:11 AM, Jerry Mo Christopherson wrote:
> I've had good luck with "Damper Doc." Up in Redding, Cal.
> Jerry Christopherson
> 9473187
Except that frequently, the 302 "three bolt"  damper he sells (used on 
302 Crate Motor installations), still retain the four bolt forward 
protruding centering ring.  This makes mounting the OEM Tiger crank 
pulley impossible without modification.  Rather than re-machine the rare 
Tiger pulley, I re-machine the damper body to accept the rear protruding 
centering ring on the OEM 3 bolt damper. All of the aftermarket 
adaptation dampers I've seen, from different sources, must come from the 
same Chinese source, because they all have this same fitment problem.  
Other than that, the dampers have worked without problems.

-- 
Tom Hall
ModTiger Engineering LLC
www.tigerengineering.net