[Tigers] Thermostat Housing and Right Angle oil filter adapter

[Ron Fraser]

Joel
	Thermostat housing only has 1 nipple for any 260 or 289 engine.
C3OZ-8594-B original thermostat housing

Your chances of finding a good original part is low.  This part is carried
by Sunbeam Specialties and you will find it in most or all early Mustang
catalogs; probably other places too.

Ron Fraser



-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Joel Martin
Sent: Wednesday, April 17, 2013 3:07 PM
To: Tiger List Serve
Subject: [Tigers] Thermostat Housing and Right Angle oil filter adapter


All

Does anyone know a part number of correct thermostat housing?  Does it have
just one nipple for a 66 MK 1A 289 motor?  I will be installing the heater
core.

Also, I purchased the FMS-M-6880-A50       90 DEGREE OIL FILTER ADAPTOR.
This
requires a nipple adapter that goes into the block and then into the bolt of
the adapter.  In checking with Summit, they said it was 3/4" x16 on both
sides.  Apparently not, anyone know the correct nipple to purchase with part
number  aaa x size on the block side and 3/4 x 16 on the adapter side.

Thanks
Joel Martin
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com




-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2904 / Virus Database: 3162/6250 - Release Date: 04/17/13