[Tigers] centerforce clutch

[Gary]

Kevin,
 
I use a Centerforce I behind my 400+ hp 331 stroker in my Tiger with no
problems other than being traction limited with street tires. I even autocross
with Kumho V700s and can fry those too in first and second, but I have never
had any clutch problems, perhaps in a heavier car, but at 2500 lbs the car
moves.
 
Gary

--- On Sat, 9/29/12, Dave Munroe <dave at munroe.ca> wrote:


From: Dave Munroe <dave at munroe.ca>
Subject: Re: [Tigers] centerforce clutch
To: "kevin beck" <kevinteresa.beck74 at gmail.com>, tigers at autox.team.net
Date: Saturday, September 29, 2012, 8:15 PM


Kevin:

Call these guys and give them your engine specs:
http://www.centerforce.com/products/centerforce-i-and-ii-series

My experience is that the Centerforce-i is good for a stock engine with less
than 300 hp.
Mine makes 317 hp at 5500rpm, and the CF-i slipped under hard acceleration.

I installed a CFii and the slip went away. I understand the CFii is good up to
400 hp.

Both are great clutch packs when used within their design limits.

Your mileage may vary.

Dave




----- Original Message ----- From: "kevin beck"
<kevinteresa.beck74 at gmail.com>
To: <tigers at autox.team.net>
Sent: Saturday, September 29, 2012 9:48 PM
Subject: [Tigers] centerforce clutch


> Getting ready to buy clutch kit, anyone have part # for the right
> centerforce. I have a 6 bolt block original toploader narrow pattern.
> Thanks
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/dave@munroe.ca
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/maliburevue@yahoo.com