[Tigers] Rear Brake lines?

[Jerry and Mo]

The rubber hose should attach to a "tab" that is welded to the right side of 
the rear axle housing (in the back) then a hard line goes from there to the 
right brake assembly, and yes there is only one bleeder and it's on the 
drivers side.  Make sure the hard line from the rubber hose goes to the 
bottom hole (the top hole goes to the drivers side) that way all the bubbles 
from bleeding will go over to the drivers side to be expelled.

Hope this helps

Jerry Christopherson
9473187

-----Original Message----- 
From: George Re
Sent: Wednesday, September 07, 2011 3:07 PM
To: Tigers
Subject: [Tigers] Rear Brake lines?

Hi again My question is. The steel brake line coming from the front of the 
car going to the rear goes to one end of the Rubber brake hose, there is a 
steel line going from the left wheel cylinder to the right wheel cylinder my 
question is where does the other end of the rubber brake hose connect?. Do I 
remove the bleeder from one of the wheel cylinders I do not remember I took 
it apart many years ago and can not find and diagrams anywhere. Thanks Again 
George Re
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: 
http://autox.team.net/mailman/options/tigers/jcmc2006@suddenlink.net