[Tigers] Brake fittings

[Bob Dixon]

Perfect!!  Thanks

On Tue, 22 Mar 2011 12:59:28 -0500, "Jerry & Maureen \(Mo\)"
<JCMC2006 at suddenlink.net> wrote:
> To my recollection it is in fact 3/8-24 straight threads, but has a copper
> washer (soft) that will do the sealing.
> 
> Jerry Christopherson
> 9473187
> 
> -----Original Message-----
> From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
> On Behalf Of Bob Dixon
> Sent: Monday, March 21, 2011 11:51 PM
> To: tigers at autox.team.net
> Subject: [Tigers] Brake fittings
> 
> I'm ready to get my brake system online so I was wondering what the fitting 
> was for the front calipers.  I will be using 3 AN stainless lines but I'm 
> not sure what adapter I need.  Looking down there it looks like a shallow 
> taper on the end.  Would this be a 3/8 - 24 female in the caliper so would 
> need a 3/8 - 24 male?  A previous owner just torqued down a 3 AN male-male 
> fitting until it stopped leaking.
> 
> Thanks again for all the help!
> Bob
> 
> P.S. The Tiger was accepted into Vintage Division of the 2011 Pikes Peak 
> Hill Climb!! I got my requested number '86'.  It will be the first Tiger to 
> ever compete in the 2nd oldest race in the country.  Pikes Peak or Bust 2011
> 
> _______________________________________________
> Tigers at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/jcmc2006@suddenlink.net