[Tigers] Brake fittings

[Jerry & Maureen (Mo)]

To my recollection it is in fact 3/8-24 straight threads, but has a copper
washer (soft) that will do the sealing.

Jerry Christopherson
9473187

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Bob Dixon
Sent: Monday, March 21, 2011 11:51 PM
To: tigers at autox.team.net
Subject: [Tigers] Brake fittings

I'm ready to get my brake system online so I was wondering what the fitting 
was for the front calipers.  I will be using 3 AN stainless lines but I'm 
not sure what adapter I need.  Looking down there it looks like a shallow 
taper on the end.  Would this be a 3/8 - 24 female in the caliper so would 
need a 3/8 - 24 male?  A previous owner just torqued down a 3 AN male-male 
fitting until it stopped leaking.

Thanks again for all the help!
Bob

P.S. The Tiger was accepted into Vintage Division of the 2011 Pikes Peak 
Hill Climb!! I got my requested number '86'.  It will be the first Tiger to 
ever compete in the 2nd oldest race in the country.  Pikes Peak or Bust 2011

_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/jcmc2006@suddenlink.net