[Tigers] Exhaust Manifold question

[David or Gary Franchi]

Since you have it off, I would heat the area around the tube with a torch, then try and wiggle the tubes loose.
David


-----Original Message-----
From: e.coiner at cox.net
Sent: Wednesday, June 22, 2011 11:11 AM
To: Tigers, George Re
Subject: Re: [Tigers] Exhaust Manifold question

Its a press fit.  Grab with pliers and pull with a gently rotating motion.  Most likely they are rusty and will snap off.
Then you drill them out and get a replacement kit from any Mustang supplier.

Erich
---- George Re <mgman71 at comcast.net> wrote: 
> I am just about to send my manifolds out for coating but have run into a small problem. There are 2 tubes on the Right manifold one goes to the choke and one goes to the bottom of the air cleaner HOW do you remove the tube (the one that goes to the bottom of the cleaner) from the manifold? I have no idea and can not find any info on it. Thanks in advance 
> 
> George Re 
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/e.coiner@cox.net
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/wwwdg@webtv.net