[Tigers] Trunk Interior - Rear Panels

[Gary]

Graham,
 
I moved my rear panels outboard to clear the latch. If I remember correctly, I
had to trim them a bit to fit perfectly. I also covered the side panels with
the same Naugahyde as the interior and the trunk curtain, gives them a nice
finished look, much better than the tacky looking shiny plastic. I'll send you
pictures.
 
Gary

--- On Sat, 9/25/10, Graham Harlowe <gharlowe at comcast.net> wrote:


From: Graham Harlowe <gharlowe at comcast.net>
Subject: [Tigers] Trunk Interior - Rear Panels
To: tigers at autox.team.net
Date: Saturday, September 25, 2010, 3:10 PM


All -

After some years, I've finally gotten around to installing the trunk
interior panels (I have the plastic replacements from SS).  The side panels
are pretty straight-forward and actually came with "hints" for the screw
holes.  The two rear panels are secured with 6 screws each, but I have a
question about the installation - do they go underneath the trunk latch
cover (i.e. do the latch cover fasteners pass through the rear panels)?
Should the rear panels be moved the extreme outboard to avoid the latch
cover?  Do the fasteners for the trunk deck "hold downs" also pass through
the rear panels? 

Photos of proper configuration appreciated...thanks much!

Cheers! 

Graham Harlowe
B382001466
_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/maliburevue@yahoo.com