[Tigers] Wheel stud replacement

[Tony Somebody]

No Randy, you have to pull the hubs. I couldnt find any studs that had the
same knurlings where they go thru the hub. The threaad is an easy match. I
also had a set of expensive 14" wheels( cant recall the brand but expensive)
and they needed spacers on the rears to clear- just a 1/4nch space fixed the
problem but I had to carry a torque wrench and check the lug nuts  every other
fill up. Perhaps I could have tightened them more but I went with the shop
mannual. They always where a bit loose. Winter came and went and the next
spring I forgot to retorque the wheels and lost one. Lucky for me I was almost
stopped when the wheel came off the lug bolts- one was already broken but
useable- so now is the time to adjust any length problems you may or may not
have. The stock bolts are just to long to get out with the hub on.
TonytheTiger

--- On Fri, 5/7/10, Randy Zimmermann <zimme008 at yahoo.com> wrote:


From: Randy Zimmermann <zimme008 at yahoo.com>
Subject: [Tigers] Wheel stud replacement
To: tigers at autox.team.net
Date: Friday, May 7, 2010, 9:55 AM


I need to replace the wheel studs on my rear wheels.  Can this be done
without
pulling the hubs off?

Appreciate any guidance or advice.  Thanks.

Randy Z
Duluth, MN
67 MkIa
_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/achd73@yahoo.com