[Tigers] need spec plate info

[awtiger]

Steve:

I looked in my copy of TBON and it says, "The "spec" plate was discontinued 
toward the end of B947++++ production but four pop-rivets were installed to 
fill these holes, until a "change order" dropped the drilling of this part 
of the cowl, somewhere around B382001200."  Carroll said that when he got 
the car, it had four blank rivets and, not knowing what we know now, he 
bought a repro spec plate when they became available and riveted it to the 
car.

So, to answer your question, to be correct you should remove the spec plate 
and (to be REALLY correct) find some original Rootes rivets to fill the 
holes with.

Enjoy,

Andy Walker
Edmond, OK
B382001600LRXFE TAC #740
B9006857LRX

----- Original Message ----- 
From: "Steve Ralsten" <s_ralsten at yahoo.com>
To: "Tiger email list" <tigers at autox.team.net>
Sent: Wednesday, March 31, 2010 2:18 PM
Subject: [Tigers] need spec plate info


> Question for one of you Book of Norman owners. My car B9473720 has the 
> proper
> chassis plate and JAL plate. It also has a repo spec plate added by PO. I
> recall from
> a past discussion that spec plates ended at chassis number ???????
> but holes for them were
> still drilled until chassis number ????????. I'm
> pretty sure my car should not have come with a plate
> hence the PO not knowing
> this added one. True ?  What I am completely uncertain about
> is if I should
> properly leave the rivets or just the holes or fill the holes.
>
> Thanks
> _______________________________________________
> Tigers at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/tigers/awtiger@cox.net