[Tigers] need spec plate info

[Smit, Theo]

IIRC that went into the early Mk1A (B38200xxxx) production.
Late B38200xxxx had no holes at all; earlier ones had the holes filled with
Rootes rivets.

The actual chassis number range where this occurs has been documented but I
don't recall if TBON has that information.

Theo

> -----Original Message-----
> From: tigers-bounces at autox.team.net [mailto:tigers-
> bounces at autox.team.net] On Behalf Of Steve Ralsten
> Sent: March 31, 2010 1:18 PM
> To: Tiger email list
> Subject: [Tigers] need spec plate info
>
> Question for one of you Book of Norman owners. My car B9473720 has the
> proper
> chassis plate and JAL plate. It also has a repo spec plate added by PO.
> I
> recall from
> a past discussion that spec plates ended at chassis number ???????
> but holes for them were
> still drilled until chassis number ????????. I'm
> pretty sure my car should not have come with a plate
> hence the PO not knowing
> this added one. True ?  What I am completely uncertain about
> is if I should
> properly leave the rivets or just the holes or fill the holes.
>
> Thanks
> _______________________________________________
> Tigers at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/theo.smit@dynastream.com


-----------------------------------------------------------------------------
---
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.

Thank you for your cooperation.