[Tigers] What do I do now?

Buck Trippel BuckTrippel at Verizon.net
Fri Jun 11 13:15:39 MDT 2010


Sandy,

Have you run across the issue of "wimpy" roll pins?

bt
----- Original Message ----- 
From: "Sandy Ganz" <sganz at pacbell.net>
To: "Dave Munroe" <dave at munroe.ca>; "Smit, Theo" <Theo.Smit at dynastream.com>; 
<tigers at autox.team.net>; <Gyroplanes at aol.com>
Sent: Friday, June 11, 2010 10:37 AM
Subject: Re: [Tigers] What do I do now?


>I think you need to check the install height of the gear from what I have 
>seen on some other ford boards as some of the MSD's have the gear on where 
>it may not be at the right install height, the last 2 Ford MSD distributors 
>I purchased had a warning to verify install clearances or expect and early 
>gear demise.
>
> I have a composite gear and will see how that work on the motor going in 
> the mustang with a solid roller. Looked iffy but had many people say they 
> are better then the bronze (never had a problem, but only used on a track 
> car).
>
> Sandy


More information about the Tigers mailing list