[Tigers] Non Tiger-Bakelite Repair
A. C. Tynes
v8tracker at gmail.com
Sun Sep 6 16:58:05 MDT 2009
Mark,
I have used two products to repair things that nothing else would adhere to.
Gorilla Snot (now called Gorilla Glue) and JB Weld. I found that when JBweld
would not stick well to something (which was rare), I could drill holes into
the edges of the object, force some JB into the holes and then apply some to
the edges and sides. The JB in the holes seems to act sort of like
reinforcing rods in concrete. No guarantees, but you might get lucky.
HTH,
A. C. Tynes
New Orleans
> -----Original Message-----
> From: tigers-bounces at autox.team.net
> [mailto:tigers-bounces at autox.team.net] On Behalf Of CoolVT at aol.com
> Sent: Sunday, September 06, 2009 9:37 AM
> To: tigers at autox.team.net
> Subject: [Tigers] Non Tiger-Bakelite Repair
>
> I have a piece of a door handle/release lever that is a poor
> design. It breaks about every 6 months. The GM dealer says
> there is no improved part and they sell a ton of them:-) It
> is some kind of hard plastic very similar in texture to the
> old bakelite we are used to.
>
> I've tried epoxy, but it doesn't seem to grab on to the
> bakelite. Is there any kind of a primer that might help or
> is there another repair substance that I might try?
> Thanks,
> Mark
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as v8tracker at gmail.com
>
> Tigers at autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
More information about the Tigers
mailing list