[Tigers] Speedograph Fog Lamp Brackets on Ebay

[Jeff Howarth]

Hi Jeff,

the hex bolt goes into the front of the chassis rail where the normal 
bumper bolt goes - the hex makes the bracket clear the front valence.

the hole in the bracket it to mount the lamp above the bumper.


regards

Jeff



In message <000f01c9d702$bfcc8d50$6401a8c0 at your03667082de>, J. Nichols 
<jxnichols at sbcglobal.net> writes
>On Ebay UK there are Speedograph fog lamp brackets # 230342318760 and I don't
>see how these mount on a Sunbeam Alpine or Tiger without drilling something.
>The listing says they are for Alpine  1, 11, V and Tiger.  If the large hole
>in the bracket is used with the bumper bolt then what is the threaded hex
>fitting used for?  It looks like the bracket would be blocked by the
>bumperette if attached using the bumper bolt.
>
>
>
>                                                     Jeff
>_______________________________________________
>Support Team.Net  http://www.team.net/donate.html
>
>Tigers at autox.team.net
>http://autox.team.net/mailman/listinfo/tigers
>
>http://www.team.net/archive
>

-- 
Jeff Howarth