[Tigers] Fw: Panel lights switch questions
Ron Fraser
rfraser at bluefrog.com
Thu Aug 27 21:43:43 MDT 2009
Jim
You can gently pry these switches apart, clean the contacts and put
back together.
The wire diagram shows the red wire, power, to terminal #4 and a red/ white
wire, gage illumination, at #8.
Do you have a second R/W wire at #1?
Ron Fraser
-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of James Pickard
Sent: Thursday, August 27, 2009 10:37 PM
To: tigers at autox.team.net
Subject: [Tigers] Fw: Panel lights switch questions
My panel lights switch is bad. It only works when it is half way between
the middle and bottom position. But I have two questions. I know up is
off, but I've forgotten what the difference is between the middle and down
position. Second question concerns the wiring. My switch has a red/white
wire attached to terminal 1 that disappears into the wiring harness. The
wiring diagram shows no such wire. Anybody else have this? If so, what is
it for? Thanks.
Jim Pickard
Lafayette, LA
B9473298
You are subscribed as rfraser at bluefrog.com
Tigers at autox.team.net http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.67/2326 - Release Date: 08/27/09
08:11:00
More information about the Tigers
mailing list