[Tigers] E-Brake Cable
steve wick
srwick at hotmail.com
Sat Sep 6 08:17:56 MDT 2008
Well one concern is the large hole in a sheet metal frame, and I'm wondering
if the lack
of one might be the reason the car seems so eager to oversteer in a tight
corner. I have
traction bars and Koni shocks, so the wheel hop hasn't really been a problem
so far. Out
of curiosity, why were the springs a poor design? They look fairly
conventional to me, just
smaller.
Steve
----- Original Message -----
From: Duke Samouce<mailto:wsamouce at kc.rr.com>
To: 'steve wick'<mailto:srwick at hotmail.com> ;
'tigers'<mailto:tigers at autox.team.net>
Sent: Saturday, September 06, 2008 6:13 AM
Subject: RE: [Tigers] E-Brake Cable
Why replace a poorly engineered piece of equipment? I do not have a
panhard
rod or traction bars installed and have no problems with wheel hop. I can
do some nice burn-outs too. I do have Dales springs installed. The
panhard
and traction bars were installed due to the original spring poor design.
Duke
B382002037
More information about the Tigers
mailing list