[Tigers] Fairmont Pulley (Steering arms)

[Thomas Witt]

I would add that one doesn't necessarily have to machine the arms.  The 
issues is that there is a slight displacement on the bolt holes on the 
spindle and those on the arm.  A small amount of time with a round file 
takes care of the matter.  I can't remember which way the displacement was. 
But, if the spacing is too long file the front hole. If it is too short file 
the back hole.  What that will do is make the arms ever so slightly forward, 
which while minor, is still a move in the right direction.
 Tom 
No virus found in this outgoing message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 270.4.1/1511 - Release Date: 6/20/2008
11:52 AM