[Tigers] Rear hub removal

[Steve Laifman]

Tigers and Theo,

See the TigersUnited.com article on this puller by Dan Walters at:

http://www.tigersunited.com/techtips/WaltersPuller/rt-WaltersHubPuller1.asp

Dan was over to my garage when we took the pictures of the puller.  
Really NEAT.

Steve

___
Steve Laifman
Editor - TigersUnited.com



Theo Smit wrote:
> James,
> I built an ugly but workable version of Dan Walters' hub puller and it 
> worked great. The rear hubs are not that beefy in the wheel flange, so 
> anything that doesn't pull equally on all four studs (or that doesn't 
> bottom on the hub flange so that you're only pulling on the studs) is 
> likely to distort the hubs. <---- snip ---->