[Tigers] Engine Removal

[Peter Laurinaitis]

i did scott's approach, not bad at all, see pic

http://img.photobucket.com/albums/v650/peter212/IMG_0035.jpg


----- Original Message ----- 
From: "Scott Hutchinson" <shutchin at netjets.com>
To: <bamcnulty at optonline.net>; <tigers at autox.team.net>
Sent: Friday, April 11, 2008 9:50 AM
Subject: Re: [Tigers] Engine Removal


> Get a towing strap...
>
> Loop it around the firewall braces...
>
> Lift the front of the car once you have unbolted the engine etc...
>
> Somewhere there was a step by step for this. Don't remember where though.
>
> Best advice I got was to take pictures of everything before doing it and 
> at a couple of steps along the way.
>
> Have fun..... ;)
>
> It's really not that bad.
>
> When you put the crossmember back on remember to jack the engine slightly 
> to un load the frame rails. I couldn't get the third bolt for the 
> crossmember into place no matter what I did. Figured there was something 
> wrong with the car. I asked on the list and bingo....