[Tigers] Engine Removal
e.coiner at cox.net
e.coiner at cox.net
Fri Apr 11 09:16:17 MDT 2008
---- Scott Hutchinson <shutchin at netjets.com> wrote:
> Get a towing strap...
>
> Loop it around the firewall braces...
+1 on this appproach.
>
> When you put the crossmember back on remember to jack the engine slightly to un load the frame rails. I couldn't get the third bolt for the crossmember into place no matter what I did. Figured there was something wrong with the car. I asked on the list and bingo....
I used one of those hydraulic porta power pushers that you can get ridiculously cheap at Harbor freight. I placed it between the frame rails in front of the engine and spread just a wee bit. Bolts went right in.
More information about the Tigers
mailing list