[Spridgets] 76 MidgetFront suspension

[Weslake1330]

I think you will need to cut the bolt either side of the trunnion and then
work it over in a vice.  Penetrating oil (not WD40) and heat and repeat,
might work.  I guess the PO didn't use copper slip.  Someone remind me in 6
months time that one of my retirement projects was to get these bolts made
in stainless steel or TI.  Don't worry, I'll be paying a personal visit to
Samco Silicone hoses (almost put hoes (silicone hoes . . .)) before then.

Regards


Daniel

On Mon, 19 Jun 2023 at 19:08, Larry Macy via Spridgets <
spridgets at autox.team.net> wrote:

>
>
> That sucker
>
> Sent from my iPhone
>
>
>
> Sent from my iPhone
> > On Jun 19, 2023, at 1:28 PM, Larry Macy <lmacy0622 at gmail.com> wrote:
> >
> > Any one have a secret for getting the stupid 1/2 inch clamp bolt out of
> the top of the suspension?  Trying to install new bushings and the clamp
> bolt is stuck in the shock arm end.
> >
> > Thanks
> > Larry
> >
> > Sent from my iPhone
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/weslake1330@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20230619/ef2ab450/attachment.htm>