[Spridgets] Name that part (real LBC content).

[Weslake1330]

Yes, it is.

On Thu, 6 Oct 2022 at 20:53, Mark Haynes <220caribou at gmail.com> wrote:

> That looks like a DCOE Blank off plate to me.
> Mark Haynes
> It only goes one way- Pay It Forward
>
>
>
> Hi List,
>
> Well the part doesn't have a real name because I made it from 6 mm (its
> probably old enough to be 1/4") aluminium plate the previous owner of my
> house left behind in the garage about 20 years ago.  If I could have bought
> one I would have.
>
> Lacking both a pillar drill and a Rolls-Royce (aviation?) apprenticeship
> where you get to file metal blocks for several years, it's almost the best
> I could manage.  The Bosch jigsaw wasn't keen (it never is) on cutting
> aluminium plate this thick but managed some of it.
>
> I'm not particularly tempted to make another one because it's not something
> I'm likely to use very often and it will get the job done despite being
> slightly lower than the standard I'd hoped for.  So, what is it?
>
> Regards
>
>
> Daniel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20221007/c379868e/attachment.htm>