<div dir="ltr">Yes, it is.</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, 6 Oct 2022 at 20:53, Mark Haynes <<a href="mailto:220caribou@gmail.com">220caribou@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">That looks like a DCOE Blank off plate to me.<br clear="all"><div><div><div dir="ltr"><div dir="ltr"><div>Mark Haynes<br></div>It only goes one way- Pay It Forward</div><div dir="ltr"><br></div><div dir="ltr"><br>
<br>
Hi List,<br>
<br>
Well the part doesn't have a real name because I made it from 6 mm (its<br>
probably old enough to be 1/4") aluminium plate the previous owner of my<br>
house left behind in the garage about 20 years ago.  If I could have bought<br>
one I would have.<br>
<br>
Lacking both a pillar drill and a Rolls-Royce (aviation?) apprenticeship<br>
where you get to file metal blocks for several years, it's almost the best<br>
I could manage.  The Bosch jigsaw wasn't keen (it never is) on cutting<br>
aluminium plate this thick but managed some of it.<br>
<br>
I'm not particularly tempted to make another one because it's not something<br>
I'm likely to use very often and it will get the job done despite being<br>
slightly lower than the standard I'd hoped for.  So, what is it?<br>
<br>
Regards<br>
<br>
<br>
Daniel

</div></div></div></div></div>
</blockquote></div>