[Spridgets] fulcrum pin

[Jim]

Thanks Brad ,Not threaded, Just purchased a major suspension kit from 
Moss and it contains 2 new pins, There is about 3/8 inch of threads at 
the top of new pins but they are for the retaining 5/16 nut.

On 7/17/2021 1:41 PM, Brad Fornal wrote:
> I believe it is threaded in, if I recall the past discussions on this 
> subject correctly.
>
> On Sat, Jul 17, 2021 at 12:22 PM Jim via Spridgets 
> <spridgets at autox.team.net <mailto:spridgets at autox.team.net>> wrote:
>
>     Is there a trick to removing the pin from the lower part of the
>     swivel I
>     backed off the 5/16 nut and put some heat on the pin, whacked with
>     brass
>     hammer. Won't budge. Trying to separate fulcrum from control arm.
>
>     Jim Fournier Huguenot NY
>
>
>
>
>     ------------------------
>
>     spridgets at autox.team.net <mailto:spridgets at autox.team.net>
>
>     Donate: http://www.team.net/donate.html
>     <http://www.team.net/donate.html>
>     Suggested annual donation: $12.75
>
>     Archive: http://www.team.net/pipermail/spridgets
>     <http://www.team.net/pipermail/spridgets>
>     http://autox.team.net/archive <http://autox.team.net/archive>
>
>     Unsubscribe/Manage:
>     http://autox.team.net/mailman/options/spridgets/tequila.brad@gmail.com
>     <http://autox.team.net/mailman/options/spridgets/tequila.brad@gmail.com>
>
>
>
> -- 
> DON JULIO 1942
>
> http://tequilabrad.com/ <http://tequilabrad.com/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20210717/0c28fcd8/attachment.htm>