[Spridgets] Datsun 5 Speed Clutch
Rick Fisk
refisk at chartermi.net
Wed Dec 8 09:34:53 MST 2021
I have an uninstalled Rivergate kit in my garage. It came with a Datsun slave cylinder and a modified Datsun clutch disc. You use the standard A-series flywheel and pressure plate. Go figure. :-)
> On Dec 8, 2021, at 10:40 AM, Bill L. via Spridgets <spridgets at autox.team.net> wrote:
>
> Hello Michael,
>
>
> When we put it together Paul just re-used the slave from the tranny on the 1098.
> I believe we have the slave adjusted "all the way out" so that the take up is not at the top of the pedal range, nor just off the floor.
> We also used the original master.
> I don't have the problem that you have at all. Easy to slip the clutch and the engagement f
>
>
>
> --
> Best regards,
> Bill mailto:Zormecteon at comcast.net
>
>
> Listen to sermon, THEN eat missionary!
>
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets http://autox.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/refisk@chartermi.net
More information about the Spridgets
mailing list