[Spridgets] Maniflow headers

[Weslake1330]

Ok wrong photo!  This photo is of the manifold that does fit and the
larger centre pipe is on the outside of the collector box.  The price was
eye-watering!

On Sat, 5 Sep 2020 at 22:37, Weslake1330 <weslake1330 at gmail.com> wrote:

> Photo attached but not this system won't fit on the Sprite/Midget!  This
> system puts the larger bore of the centre pipe in the centre of the
> collector box.  However, the actual system that does fit, puts the larger
> bore of the Centre pipe on the outside of the collector box.  The collector
> box is flat in design for optimal ground clearance (even on a road going
> Sprite/Midget).
>
> Regards
>
>
> Daniel
>
> On Sat, 5 Sep 2020 at 20:27, crusaderchuck55--- via Spridgets <
> spridgets at autox.team.net> wrote:
>
>> Anyone have a 3 into one header?
>> If so can you send me a picture of the 3 into 1 collector?
>> Thank you!
>> Chuck
>>
>> *Sent from my LG Mobile*
>> ------------------------
>>
>> spridgets at autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation: $12.75
>>
>> Archive: http://www.team.net/pipermail/spridgets
>> http://autox.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/spridgets/weslake1330@gmail.com
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20200905/ec87a5fa/attachment.htm>