[Spridgets] Maniflow headers

[Weslake1330]

Photo attached but not this system won't fit on the Sprite/Midget!  This
system puts the larger bore of the centre pipe in the centre of the
collector box.  However, the actual system that does fit, puts the larger
bore of the Centre pipe on the outside of the collector box.  The collector
box is flat in design for optimal ground clearance (even on a road going
Sprite/Midget).

Regards


Daniel

On Sat, 5 Sep 2020 at 20:27, crusaderchuck55--- via Spridgets <
spridgets at autox.team.net> wrote:

> Anyone have a 3 into one header?
> If so can you send me a picture of the 3 into 1 collector?
> Thank you!
> Chuck
>
> *Sent from my LG Mobile*
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/weslake1330@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20200905/2e9fedc7/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1111279 LoRes.jpg
Type: image/jpeg
Size: 443373 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/spridgets/attachments/20200905/2e9fedc7/attachment.jpg>