[Spridgets] small bore con rod orientation

[Mark Haynes]

Thanks! How did I miss that? so the bolt heads go towards the cam as I
thought.
Mark Haynes
It only goes one way- Pay It Forward


On Thu, Oct 29, 2020 at 1:49 PM Rick Fisk <refisk at chartermi.net> wrote:

> Here ya go....
>
>
>
> Sent from my keyboard
>
> > On Oct 29, 2020, at 3:19 PM, Mark Haynes via Spridgets <
> spridgets at autox.team.net> wrote:
> >
> > 
> > So I'm about ready to put the pistons on the rods for my new 948, the
> pistons are pop-ups with valve cutouts so they must be oriented properly
> when mounted to the rods. The trouble is that I didn't disassemble this
> engine and can't find anything that tells me which way the rods go in and
> its been 10 years since I assembled a 948.
> > The block is on the stand, if I'm looking down at the block and the oil
> filter and genny mount are next to me, are the rod bolt heads pointing
> towards me or away from me?   I'm thinking that they should point away from
> me towards the cam, but it's 50:50 whether I'm right or not.
> > TIA for the help
> > Mark Haynes
> > It only goes one way- Pay It Forward
> > ------------------------
> >
> > spridgets at autox.team.net
> >
> > Donate: http://www.team.net/donate.html
> > Suggested annual donation: $12.75
> >
> > Archive: http://www.team.net/pipermail/spridgets
> http://autox.team.net/archive
> >
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/refisk@chartermi.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20201029/148b4d1b/attachment.htm>