[Spridgets] small bore con rod orientation

[Rick Fisk]

Here ya go....

-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 266292 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/spridgets/attachments/20201029/7efe7d8f/attachment.jpeg>
-------------- next part --------------


Sent from my keyboard

> On Oct 29, 2020, at 3:19 PM, Mark Haynes via Spridgets <spridgets at autox.team.net> wrote:
> 
> ?
> So I'm about ready to put the pistons on the rods for my new 948, the pistons are pop-ups with valve cutouts so they must be oriented properly when mounted to the rods. The trouble is that I didn't disassemble this engine and can't find anything that tells me which way the rods go in and its been 10 years since I assembled a 948. 
> The block is on the stand, if I'm looking down at the block and the oil filter and genny mount are next to me, are the rod bolt heads pointing towards me or away from me?   I'm thinking that they should point away from me towards the cam, but it's 50:50 whether I'm right or not.
> TIA for the help
> Mark Haynes
> It only goes one way- Pay It Forward
> ------------------------
> 
> spridgets at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
> 
> Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/refisk@chartermi.net