[Spridgets] Trying to diagnose an idle/stalling issue

[crusaderchuck55 at aol.com]

Sent from my LG MobileJust the usual surface prep.   Clean both mating surfaces .    The intake/exhaust gaskets seem to have quite a bit of compressability in the material.   Try tightening the manifold nuts before disassembly .   Be certsin you have the thick washers under the nuts on each of the studs.   The washers spread the retaining nuts pressure in securing the manifolds.   If you have brass nuts be careful of over tightening those because the steel studs try to strip the threads out of the softer brass nuts.  Chuck
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20201228/9f7890cb/attachment.htm>