[Spridgets] I had forgotten!
Rick Fisk
refisk at chartermi.net
Sat Feb 9 15:31:30 MST 2019
You need to post some pictures Daniel!
Sent from my keyboard
> On Feb 9, 2019, at 3:00 PM, Weslake1330 via Spridgets <spridgets at autox.team.net> wrote:
>
> The exhaust clamp arrived today so the system and silencer are now connected. The clamp came from China and hopefully wasn't from a dung-fired forge. If anyone can find something similar that is actually manufactured in the UK or USA I'll buy one. The Mikalor brackets are made in Spain and don't have a stainless fixture and bolt.
>
> One job I will need to do, not sure why (it didn't need this before), is apply some heat to the system pipe just before the silencer and bend it up some.
>
> Regards
>
> Daniel
>
>> On Fri, Feb 8, 2019 at 8:37 PM <corvallis at peoplepc.com> wrote:
>> You win. Thanks for the updates. Bill in Oregon
>>
>> =====================================
>>
>> From: Spridgets <spridgets-bounces at autox.team.net> On Behalf Of Weslake1330 via Spridgets
>> Sent: Friday, February 8, 2019 11:55 AM
>> To: Spridgets <spridgets at autox.team.net>
>> Subject: [Spridgets] I had forgotten!
>>
>>
>>
>> Hi List,
>>
>>
>>
>> I got the 3 into 1 CV manifold back from being coated today and fitted it to my Sprite. It was fiddly to fit but eventually all three pipes were in the collector box ok and I tightened it up with ARP stainless steel bolts and nuts (not nylock). I figure if the manifold lasts 5 years before it needs recoating and a total of ten years after that it will be safe for me to tell my wife how much it cost.
>>
>>
>>
>> I had forgotten what?
>>
>>
>>
>> To connect the throttle cable back to the carb - nope
>>
>>
>>
>> To fit the fuel line to the carb - nope
>>
>>
>>
>> To fit the system pipe and silencer to the manifold collector box - nope
>>
>>
>>
>> How cold it would be in the garage - nope
>>
>>
>>
>> How loud the Sprite is running the engine without having fitted the system pipe and silencer - Yep.
>>
>>
>>
>> Wow, I couldn't believe how loud it was, even on what passes for idling. It also ran nice and clean with no spitting, popping or backfiring despite the cold weather.
>>
>>
>>
>> Of course I did this on purpose since it's really rare I get to hear the Sprite running on an open pipe. Also I have a new stainless steel clamp on order for the system pipe to manifold collector that simply hasn't arrived yet. I do have an alternative clamp but while made in stainless it has a conventional bolt and on the clamp I removed the bolt was heavily rusted - hence a replacement with a stainless bolt (that I plan to replace with an ARP stainless bolt)
>>
>>
>>
>> So having given the neighbours something to complain about I wanted to share it with the list.
>>
>>
>>
>> Regards
>>
>>
>>
>>
>>
>> Daniel
>>
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/refisk@chartermi.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20190209/9a971b99/attachment.html>
More information about the Spridgets
mailing list